How do I install the 5 1/2″ TILE HANGER?

First clean the back of the tile, (…even if the tile is new, as surface contamination may inhibit adhesion).
Wet the adhesive side of the disc and slowly agitate with your finger to activate the glue.
When the glue becomes “tacky” apply the disc to the back of the tile (ensure the hook is in the correct position for tile design).
Press down firmly.
Leave to dry overnight before thoroughly testing strength of adhesion.
Hang your tile on a wall and admire!
The Disc removes completely in warm water and will not remove glazes, or any other markings.